Hammer Crusher-Hammer Rock Breaker-Leda Hammer Crusher Manufacturer

December 18, 2022

Hammer Crusher-Hammer Rock Breaker-Leda Hammer Crusher Manufacturer Introduction Hammer type stone breaking machine is widely used in fine grinding medium hardness materials in industrial departments such as mineral processing plant, refractory material factory, cement factory, glass factory, etc. It is also called heavy hammer crusher. It can be used for dry and wet crushing. The wet type is the best wet coal crusher equipment for water seepage and wet grinding. Dry type does not allow water to dry. mill. Note: The production capacity is related to the physical properties of the crushed materials, the feeding mode, the feed size and composition.
The PC series hammer crusher produced by the hammer crusher manufacturer Lida Heavy Industry has the characteristics of large crushing ratio and is suitable for crushing brittle materials.
The main working part of the heavy hammer rockbreaker is a rotor with a hammer (also known as a hammer). The rotor consists of a main shaft, a disc, a pin and a hammer. The motor drives the rotor to rotate at high speed in the crushing chamber. The material is fed into the machine from the upper feed port, and is crushed by the impact, impact, shearing and grinding action of the high-speed moving hammer. In the lower part of the rotor, a sieve plate is arranged, and the size of the pulverized material smaller than the mesh size is discharged through the sieve plate, and the coarse-grained grade larger than the mesh size is retained on the sieve plate and continues to be struck and ground by the hammer, and finally passed through the sieve plate. Exhausted from the machine.

Hammer-type stone body, rotor, hammer, counter-liner, sieve plate and so on.
(1) Work hammer, cast by new technology, with wear resistance and impact resistance.
(2) Hammer type stone breaking machine can adjust the required particle size according to customer requirements.
(3) The hammer breaks the entire structure of the body and seals, solving the dust pollution of the crushing workshop and the problem of leakage of the body.
(4) The overall design of the hammer mill is beautiful, compact, with less wearing parts and convenient maintenance. It is an upgraded product.

Hammer mills are used to break a variety of medium hard and abrasive materials. The compressive strength of the material does not exceed 100 MPa, and the water content is less than 15%. The crushed materials are coal, salt, chalk, gypsum, brick, limestone and the like. It is also used to crush waste wood, paper and broken asbestos cement with strong fiber structure, elasticity and toughness to recover asbestos fiber, etc. It can also be used as stone crushing, stone crushing, mine crushing, plastic crushing, garbage crushing and other materials. Used for crushing equipment. In addition, the hammer crusher can be used not only for crushing production lines, sand production lines, but also for conical crushers in beneficiation production lines.
The main working part of the hammer mill is a rotor with a hammer (also called a hammer). The rotor consists of a main shaft, a disc, a pin and a hammer. The motor drives the rotor to rotate at high speed in the crushing chamber. The material is fed into the machine from the upper feed port, and is crushed by the impact of a high-speed moving hammer, impact hammer crusher, shearing and grinding. In the lower part of the rotor, a sieve plate is arranged, and the size of the pulverized material smaller than the mesh size is discharged through the sieve plate, and the coarse-grained grade larger than the mesh size is retained on the sieve plate and continues to be struck and ground by the hammer, and finally passed through the sieve plate. Exhausted from the machine.

The hammer type stone breaking machine is currently divided into two types: heavy and light. The ring hammer type pulverizer (light hammer crusher) is suitable for the crushing of Mohs hardness secondary materials, using a broken coal ring hammer. Hammer crusher (heavy hammer breaker) is suitable for the crushing of brittle materials with a Mohs hardness of five or less. Because the mass of the ore hammer crusher is greater than the mass of the broken coal hammer type stone crusher, the impact force of the ring hammer can be improved and the purpose of crushing the ore can be achieved.

do not	Model specification	Feed granularity (mm)	Discharge granularity (mm)	Production capacity (m3/h)	Motor	Total weight (t)	Dimensions (length × width × height) (mm)
Number of poles	Power (kw)
Hammer type stone breaking machine	PCΦ400×300	≤200	≤25	5-10	4	11	0.8	900×670×860
PCΦ600×400	≤250	≤30	10-22	4	twenty two	2.26	1200×1050×1200
PCΦ800×600	≤250	≤35	18-40	4	55	4.8	1310×1180×1310
PCΦ1000×800	≤350	≤35	25-50	4	75	5.9	1600×1390×1575
PCΦ1000×1000	≤350	≤35	30-55	6	132	8	1800×1590×1775
PCΦ1250×1250	≤350	≤35	35-65	6	180	14	2060×1600×1890
PCΦ1400×1400	≤350	≤35	50-100	6	280	32	2365×1870×2220
PCΦ1600×1600	≤350	≤35	100-150	8	480	37.5	3050×2850×2800